Blacksmith Hardy Anvil Tool Turning Bending Forge Scrolling Twisting Jig
from $31.95
Up for sale is a Blacksmith Turning Jig Hardy. This hardy tool fits in a various Hardy holes in a anvil or can be used in a vise.
Perfect for doing repeatable scroll work.
I use one when doing scroll work in the shop.
A very handy tool.
The total length is 6.5 inches long.
The turning forks are 2.5 inches long and one is made from 3/4 inch American cold rolled steel (1018 steel), the 2 3/8 inch diameter heavy wall tube.
The turning hardy was hand built/welded in Montana with 7018 welding rod for strength. Each one has two welding passes, 6010 root pass and 7018 filler pass. Not glued gunned, i mean not mig welded either, it is stick welded. Cold Rolled steel by most welding codes and standards mig welding is not allowed, only stick or tig welding.
This is not one of those cheap knock offs that can and will break on you. This tool will last you a lifetime
Please put custom size in the notes section at checkout.
Please look at the pictures.
All Hardy Tools handcrafted from Pronghorn Ironworks after 03/01/17 will bear/stamped with a heart for brand recognition and because my daughter likes it.
The pictures are part of the description. You will receive one similar to the ones shown in the pictures.
Thanks for looking.
Please feel free to ask questions.
Perfect for doing repeatable scroll work.
I use one when doing scroll work in the shop.
A very handy tool.
The total length is 6.5 inches long.
The turning forks are 2.5 inches long and one is made from 3/4 inch American cold rolled steel (1018 steel), the 2 3/8 inch diameter heavy wall tube.
The turning hardy was hand built/welded in Montana with 7018 welding rod for strength. Each one has two welding passes, 6010 root pass and 7018 filler pass. Not glued gunned, i mean not mig welded either, it is stick welded. Cold Rolled steel by most welding codes and standards mig welding is not allowed, only stick or tig welding.
This is not one of those cheap knock offs that can and will break on you. This tool will last you a lifetime
Please put custom size in the notes section at checkout.
Please look at the pictures.
All Hardy Tools handcrafted from Pronghorn Ironworks after 03/01/17 will bear/stamped with a heart for brand recognition and because my daughter likes it.
The pictures are part of the description. You will receive one similar to the ones shown in the pictures.
Thanks for looking.
Please feel free to ask questions.
HARDY SIZE:
Quantity:
Up for sale is a Blacksmith Turning Jig Hardy. This hardy tool fits in a various Hardy holes in a anvil or can be used in a vise.
Perfect for doing repeatable scroll work.
I use one when doing scroll work in the shop.
A very handy tool.
The total length is 6.5 inches long.
The turning forks are 2.5 inches long and one is made from 3/4 inch American cold rolled steel (1018 steel), the 2 3/8 inch diameter heavy wall tube.
The turning hardy was hand built/welded in Montana with 7018 welding rod for strength. Each one has two welding passes, 6010 root pass and 7018 filler pass. Not glued gunned, i mean not mig welded either, it is stick welded. Cold Rolled steel by most welding codes and standards mig welding is not allowed, only stick or tig welding.
This is not one of those cheap knock offs that can and will break on you. This tool will last you a lifetime
Please put custom size in the notes section at checkout.
Please look at the pictures.
All Hardy Tools handcrafted from Pronghorn Ironworks after 03/01/17 will bear/stamped with a heart for brand recognition and because my daughter likes it.
The pictures are part of the description. You will receive one similar to the ones shown in the pictures.
Thanks for looking.
Please feel free to ask questions.
Perfect for doing repeatable scroll work.
I use one when doing scroll work in the shop.
A very handy tool.
The total length is 6.5 inches long.
The turning forks are 2.5 inches long and one is made from 3/4 inch American cold rolled steel (1018 steel), the 2 3/8 inch diameter heavy wall tube.
The turning hardy was hand built/welded in Montana with 7018 welding rod for strength. Each one has two welding passes, 6010 root pass and 7018 filler pass. Not glued gunned, i mean not mig welded either, it is stick welded. Cold Rolled steel by most welding codes and standards mig welding is not allowed, only stick or tig welding.
This is not one of those cheap knock offs that can and will break on you. This tool will last you a lifetime
Please put custom size in the notes section at checkout.
Please look at the pictures.
All Hardy Tools handcrafted from Pronghorn Ironworks after 03/01/17 will bear/stamped with a heart for brand recognition and because my daughter likes it.
The pictures are part of the description. You will receive one similar to the ones shown in the pictures.
Thanks for looking.
Please feel free to ask questions.
Up for sale is a Blacksmith Turning Jig Hardy. This hardy tool fits in a various Hardy holes in a anvil or can be used in a vise.
Perfect for doing repeatable scroll work.
I use one when doing scroll work in the shop.
A very handy tool.
The total length is 6.5 inches long.
The turning forks are 2.5 inches long and one is made from 3/4 inch American cold rolled steel (1018 steel), the 2 3/8 inch diameter heavy wall tube.
The turning hardy was hand built/welded in Montana with 7018 welding rod for strength. Each one has two welding passes, 6010 root pass and 7018 filler pass. Not glued gunned, i mean not mig welded either, it is stick welded. Cold Rolled steel by most welding codes and standards mig welding is not allowed, only stick or tig welding.
This is not one of those cheap knock offs that can and will break on you. This tool will last you a lifetime
Please put custom size in the notes section at checkout.
Please look at the pictures.
All Hardy Tools handcrafted from Pronghorn Ironworks after 03/01/17 will bear/stamped with a heart for brand recognition and because my daughter likes it.
The pictures are part of the description. You will receive one similar to the ones shown in the pictures.
Thanks for looking.
Please feel free to ask questions.
Perfect for doing repeatable scroll work.
I use one when doing scroll work in the shop.
A very handy tool.
The total length is 6.5 inches long.
The turning forks are 2.5 inches long and one is made from 3/4 inch American cold rolled steel (1018 steel), the 2 3/8 inch diameter heavy wall tube.
The turning hardy was hand built/welded in Montana with 7018 welding rod for strength. Each one has two welding passes, 6010 root pass and 7018 filler pass. Not glued gunned, i mean not mig welded either, it is stick welded. Cold Rolled steel by most welding codes and standards mig welding is not allowed, only stick or tig welding.
This is not one of those cheap knock offs that can and will break on you. This tool will last you a lifetime
Please put custom size in the notes section at checkout.
Please look at the pictures.
All Hardy Tools handcrafted from Pronghorn Ironworks after 03/01/17 will bear/stamped with a heart for brand recognition and because my daughter likes it.
The pictures are part of the description. You will receive one similar to the ones shown in the pictures.
Thanks for looking.
Please feel free to ask questions.